Universal Robots UR5

15.6 Set Time
Panel for setting up the Ethernet network. An Ethernet connection is not necessary
for the basic robot functions, and is disabled by default.
15.6 Set Time
Set the time and date for the system and configure the display formats for the clock.
The clock is displayed at the top of the Run Program and Program Robot screens.
Tapping on it will show the date briefly. The GUI needs to be restarted for changes
to take effect.
CB3 II-110 Version 3.4.5
Copyright © 2009–2017 by Universal Robots A/S. All rights reserved.