Universal Robots UR5

4.4 Maximum Payload
4.4 Maximum Payload
The maximum allowed payload of the robot arm depends on the center of gravity
offset, see figure 4.3. The center of gravity offset is defined as the distance between
the center of the tool output flange and the center of gravity.
0 100 200 300 400 500 600
1
2
3
4
5
6
Center of gravity offset
[mm]
Payload [kg]
Figure 4.3: Relationship between the maximum allowed payload and the center of gravity offset.
Version 3.4.5
Copyright © 2009–2017 by Universal Robots A/S. All rights reserved.
I-25 UR5/CB3