15.3 Set Password
15.3 Set Password
Two passwords are supported. The first is an optional System password which pre-
vents unauthorized modification of the setup of the robot. When the System pass-
word is set, programs can be loaded and executed without the password, but the
user must enter the correct password in order to create or change programs.
The second is a required Safety password which must be entered correctly in order
to modify the safety configuration.
NOTE:
In order to change the safety configuration, the Safety password
must be set.
WARNING:
Add a System password to prevent non-authorized personnel
from changing the robot installation.
CB3 II-108 Version 3.4.5
Copyright © 2009–2017 by Universal Robots A/S. All rights reserved.
To Next Page
Loading...
