Table 64: Digital ouput signals (Control keypad: Menu M2 -> G2.2.4)
Index Parameter Min Default Cust ID Description
P2.3.3.23 * Motor regulator activation 0.1 0.1 454
P2.3.3.24 * Fieldbus DIN 1 0.1 0.1 455 See fieldbus manual
P2.3.3.25 * Fieldbus DIN 2 0.1 0.1 456 See fieldbus manual
P2.3.3.26 * Fieldbus DIN 3 0.1 0.1 457 See fieldbus manual
P2.3.3.27 * Fieldbus DIN 4 0.1 0.1 169 See fieldbus manual
P2.3.3.28 * Fieldbus DIN 5 0.1 0.1 170 See fieldbus manual
NXP drives only
P2.3.3.29 * DC ready pulse 0.1 0.1 1218 For external DC charger
P2.3.3.30 * Safe Disable Active 0.1 0.1 756
* = Use TTF method to program these parameters.
CAUTION!
Be ABSOLUTELY sure not to connect two functions to one and same output in order
to avoid function overruns and to ensure flawless operation.
MULTI-PURPOSE CONTROL APPLICATION VACON · 159
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
6
To Next Page
Loading...
