Vacon NX series - Control Unit Cabling; Selection of the Control Cables

Table 25: Basic parameters G2.1
Index Parameter Min Max Unit Default Cust ID Description
P2.1.25 Preset speed 11 0.00 P2.1.2 Hz 32.50 136
Speeds preset by
operator.
P2.1.26 Preset speed 12 0.00 P2.1.2 Hz 35.00 137
Speeds preset by
operator.
P2.1.27 Preset speed 13 0.00 P2.1.2 Hz 40.00 138
Speeds preset by
operator.
P2.1.28 Preset speed 14 0.00 P2.1.2 Hz 45.00 139
Speeds preset by
operator.
P2.1.29 Preset speed 15 0.00 P2.1.2 Hz 50.00 140
Speeds preset by
operator.
* = Parameter value can only be changed after the AC drive has been stopped.
VACON · 76 MULTI-STEP SPEED CONTROL APPLICATION
4
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205