Valleylab Force FX-C - Page 44

Output Characteristics
Bipolar
Precise
Macro
Monopolar Cut
Low
Blend
Monopolar Coag
Desiccate
LCF Fulgurate
3-12
470 kHz sinusoid
470 kHz sinusoid
390 kHz sinusoid; Similar to the Pure cut mode except the maximum
voltage is limited to a lower value
390 kHz bursts of sinusoid, recurring at 27 kHz intervals; 50% duty
cycle
240 kHz sinusoid repeated at 39 kH; 8% duty cycle
390 kHz damped sinusoidal bursts with a repetition frequency 0; 57 kHz into
500 ohms
Force FXTM-C Service Manual