Valleylab Force FX-C - Connecting the CUSA Handpiece with CEM Nosecone

Setting Up the Generator
Figure 5-8.
Connections for combined
monopofarluftrasonic surgery
5-10
a high positive voltage while the other acquires an opposite negative
voltage. When this occurs, the potential voltage difference between .them
may cause the current to flow from one patient return electrode to the
other. The current causes no harm if it produces no sparks or high current
densities on the patient.
Place
each patient return electrode as close as possible to the site of the
surgery to be performed by the generator to which it is connected. Ensure
that the two patient return electrodes do not touch.
Connecting the CUSA Handpiece with CEM Nosecone
Waming
CEM indicator
illuminates green
GUSA handpiece
with GEM
..... -- ..
.,. .........
.
.
.
.
It you choose to use
a monopolar
footswitch, you
must connect it to
the Monopolar 1
Footswitch .
Connect to CUSA system
~ Patient return electrode
Force FXTM-C Service Manual