Chapter 3 Starting up
First start: configuring your regional settings
User Manual 79000000203 Rev. 005 23
On the parameter Address Type, select if the address of the
server which will be used for synchronization is entered via its IP
Address or via the Server Name..
If IP Address is selected, enter one or two server addresses in
the following parameters. During synchronization, the first
address will always be used, but if a fail occurs, the second one
will be used.
If Server Name is selected, enter the name of the server, and if
necessary a name for second server. During synchronization,
the first server name will always be used, but if a fail occurs, the
second one will be used.
During synchronization the icon displays on the upper banner between
the date and time.
1 Once all parameters have been defined, press Exit menu key to
return to System Settings page.
To Next Page
Loading...
