Chapter 7 Transferring the 2000 Platform Interface
Establishing connection
68 User Manual 79000000203 Rev. 005
– IP Address IP address of the 2000 Platform
– IP Mask address of the mask of the sub-network
– IP Gateway IP address of the machine enabling access outside the
sub-network.
– DNS
1
IP address of the machine providing the IP address on
the basis of the name
– Domain namename of the local network to which the 2000 Platform
is connected.
Dynamic in this mode, which requires a DHCP server, the
2000
Platform requests an IP address from this server
which will be allocated dynamically if dynamic host
configuration is activated on the local network.
After selecting this mode or after power-on, the 2000
Platform tries to establish a connection to obtain an
address from a DHCP server. If for any reason, this
process fails, the 2000 Platform reverses to static IP
address mode with User1 IP address.
Proxy > Use proxy
1 Select No if no proxy is used.
2 If Manual has been selected, enter the Proxy Address.
3 If Auto has been selected, enter the Pac Address.
1.Domain Name Server
NOTE
Once the 2000 Platform is connected to the network, the
icon indicates the connection is working.
To Next Page