2-2 Introduction Rev AB
Videojet 8520 Operator Manual
Introduction
The policy of Videojet Technologies Inc. is to manufacture non-contact
printing/coding systems and ink supplies that meet high standards of
performance and reliability. Therefore, we employ strict quality control
techniques to eliminate the potential for defects and hazards in our
products.
The safety guidelines provided in this chapter are intended to educate the
operator on all safety issues so that the operator can operate the printer
safely.
Equipment Safety Guidelines
This section contains important safety guidelines pertaining to the
operation and handling of the printer and associated equipment.
PERSONAL INJURY. While performing maintenance or repair
work, disconnect the mains supply unless it is absolutely necessary
to leave the supply on while carrying out adjustments.
Comply with Electrical Codes
PERSONAL INJURY. All electrical wiring and connections must
comply with applicable local codes. Consult the appropriate
regulatory agency for further information.
Do Not Remove Warning Label
PERSONAL INJURY. Do not, under any circumstances, remove or
obstruct any warning, caution, or instruction labels present on the
printer.
To Next Page
Loading...