2-6 Safety Warnings for Videojet 8520 Printer Rev AB
Videojet 8520 Operator Manual
PERSONAL INJURY. Ensure that all external energy sources, mains
and mains power connector are isolated from equipment. This
should be done before attempting any maintenance or repair on any
part of the product or before opening or removing any printer
covers.
PERSONAL INJURY. Ensure that any cables from the printer are
secured to avoid chance of movement into walkways and becoming
a trip hazard.
PERSONAL INJURY. There will be sections of the Videojet 8520
control board that will be permanently powered via the on-board
lithium battery - therefore it is essential that the board should never
be placed onto, nor stored in or on any conductive surface (including
conductive, plastic bags etc.) as this would flatten the battery and/or
potentially result in battery overheating. The battery is not to be
replaced by the operator.
Communications
EQUIPMENT DAMAGE. Ensure that all Ethernet/communication
cables are shielded (STP Cat5).
To Next Page
