Rev AB Using the Tools Screen 4-9
Videojet 8520 Operator Manual
Recalibrate Touchscreen Allows the user to recalibrate the
touchscreen, if touching the screen does not
accurately locate the correct CLARiTY
button. The printer requests the user to
touch several crosses which are displayed
on the screen, one after the other. The screen
is recalibrated when the automated process
is complete.
Note: If the calibration of the machine has too
many errors and does not allow a user to
navigate to this screen via the CLARiTY panel,
the same functionality can be triggered from
within CLARiTY Configuration manager.
Set Screen Orientation Allows the user to rotate the entire display
through 180 degrees in the event that the
CLARiTY panel is installed in an inverted
orientation.
Date and Time Allows the user to set the system date and
time of the printer.
Image Control Allows the adjustment of the bar code.
Communications Allows the user to reset all communication
ports if their setup is corrupted.
Option Description
Table 4-5: Control Screen (Continued)
To Next Page
Loading...
