1-2 SHB 803 en – Edition 2.4 * 803s110.fm
Operation
1 Operation
1.1 Information on this service manual
This service manual contains important information on how to work safely, correctly and
economically with the machine. Therefore, it aims not only at new personnel, but it also
serves as a reference for experienced personnel. It helps to avoid hazardous situations
and reduce repair costs and downtimes.
Furthermore, the reliability and the service life of the machine will be increased by follow-
ing the instructions in the service manual.
Careful and prudent working is the best way to avoid accidents!
Operational safety and readiness of the machine do not only depend on your skill, but also
on maintenance and servicing of the machine. This is why regular maintenance and ser-
vicing is absolutely necessary.
Extensive maintenance and repair work must always be performed by a Wacker Neuson
service center. Use only original spare parts for repairs. This ensures operational safety
and readiness of your machine, and maintains its value.
• We reserve the right to improve the technical standard of our machines without
adapting the service manual.
• Modifying Wacker Neuson products and fitting them with additional equipment and
attachments not included in our delivery program requires Wacker Neuson’s written
authorization, otherwise warranty and product liability for possible damage caused by
these modifications shall not be applicable.
• Subject to modifications and printing errors.
Your Wacker Neuson dealer will be happy to answer any further questions regarding the
machine or the service manual.
Abbreviations/symbols
• Identifies a list
• Subdivision within lists or an activity. Follow the steps in the recommended order
☞Identifies an activity
➥Description of the effects or results of an activity
n. s. = not shown
“Opt” = option
Stated whenever controls or other components of the machine are installed as an option.
A combination of digits, or a combination of digits and letters, for example 40/18 or 40/A
used for identifying the control elements, means:
Figure no. 40/control element no. 18 or position A in figure no. 40
Figures carry no numbers if they are placed to the left of the text.
Operation
To Next Page
Loading...
Need help?
General
