3-50 SHB 803 en – Edition 2.4 * 803s314.fm
Maintenance
Ball sockets (ISO/SAE changeover option)
☞Stop and park the machine.
☞Raise covers 1.
☞Slide the knurled sleeve 13 upward, and hold, unhitch and grease it with Gleitmo 800
lubricant.
☞The sleeve is safely locked if it is firmly connected with the ball pin and if it is engaged
in the lower position.
☞Lower covers 1.
Maintenance of attachments
Correct maintenance and service is absolutely necessary for smooth and continuous
operation, and for an increased service life of the attachments. Observe the lubrica-
tion and maintenance instructions in the Operator’s Manuals of the attachments.
Fig. 53: Control stand covers
1
Fig. 54: Ball pins (SAE controls shown)
1313
To Next Page
