SHB 803 en – Edition 2.4 * 803s710.fm 7-5
Options
Raising/lowering the rollbar:
Raising the rollbar:
☞Park the machine on level ground
☞Stop the engine
☞Lock the control levers
☞Install suitable lifting gear on the rollbar
☞Remove the linch pins and pins A on either side
☞Slowly and carefully raise the rollbar with suitable lifting gear and auxiliary means
☞Fit pins A again on either side and secure them with the linch pins
Lowering the rollbar:
☞Park the machine on level ground
☞Stop the engine
☞Lock the control levers
☞Install suitable lifting gear on the rollbar
☞Remove the linch pins and pins A on either side
☞Slowly and carefully lower the rollbar with suitable lifting gear and auxiliary means
☞Fit pins A again on either side and secure them with the linch pins
Fig. 4: Lowered ROPS rollbar (option)
A
To Next Page
