5-20 SHB 803 en – Edition 2.4 * 803s510.fm
Hydraulic system
Drive levers (from serial number AI00815)
Setting the drive levers
☞Place the machine horizontally
☞Adjust the length of the adjustment linkage so that the shackle on the drive lever
remains horizontal without any appreciable resistance in neutral position when the lock
is actuated.
➥A correct setting ensures maximum operating comfort and best possible straight-
ahead driving features.
The pedals for the auxiliary hydraulics and for swiveling cannot be adjusted.
Pos. Connection
1 Shackle on drive lever
2 Adjustment linkage
3 Lock
4 Lock linkage
5 Main valve block
To Next Page
Loading...
