3-8 SHB 803 en – Edition 2.4 * 803s311.fm
Maintenance
3.3 Maintenance plan (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of
the attachment manufacturer.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 2000 o/h
Customer
Authorized
service center
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●● ●
• Engine oil filter
2
●● ●
• Fuel filter
3
●● ●
• Water separator ●●
• Coolant ●●
• Hydraulic oil filter insert
4
●● ●
• Hydraulic oil
5
●● ●
• Drain condensation water from the hydraulic oil reservoir (from serial no. AH02272) ●●
• Air filter element (up to serial no. AI00875) ●●
• Air filter element according to dirt indicator (from serial no. AI00876)
6
●●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil
●●
• Engine coolant ●●
• Fuel ●●
• Hydraulic oil ●●
Check the function of the pedals (up to serial no. AI00975)
• Clean, lubricate or repair the pedals
●●
Check the function of the pedals, they must flip back automatically (from serial no. AI00976)
• Clean, lubricate or repair the pedals, check the torsion springs
●●
Clean water ducts
7
●●
Check radiator for engine and hydraulic oil for dirt. Clean if necessary
●●
Check cooling systems and hoses for leaks and pressure (visual check)
●●
Maintenance
To Next Page
Loading...
