Installation
TITANUS
PRO·SENS
®
106
06/13
Opening the TITANUS
PRO·SENS
®
Figure 60: Opening the TITANUS
®
WARNING
The components on the base and circuit board must be protected from
damage with an anti-static set.
To open TITANUS
®
follow the steps below:
1. Using a screwdriver carefully unlocks the snap-in closures of the housing
by simultaneously pressing in both clips located on one side of the hous-
ing lid. Lift the lid carefully.
2. Pull the display board cable off the base board. Remove the lid.
6.2
To Next Page
Loading...
