TITANUS
PRO·SENS
®
Technical Description
06/13
21
Technical Description
System Description
The air sampling smoke detection system TITANUS
®
consists of the basic
device and the pipe system.
The most important components of the basic device include the sensitive de-
tector modules for the detection of smoke aerosols and the aspiration unit to
carry air samples to the detector module with integrated air flow sensor in
order to monitor the pipe system for any fractures and blockages.
Only for TITANUS
PRO·SENS
®
2 one of the two detector modules can be
equipped with or without air flow sensor and with or without LOGIC·
SENS
.
On the whole, the pipes and fittings are made of PVC or ABS plastic.
For the pipe design each air sampling point in the pipe system of TITANUS
PRO·SENS
®
represents a point type detector.
Figure 4: Air sampling system TITANUS PRO•SENS
®
To guarantee a safety operation (cleanest room, recycling area), an exten-
sive attachment stands to disposal like i.e. different air filter or response indi-
cator.
3
3.1
To Next Page
Loading...
