TITANUS
PRO·SENS
®
Product Description
06/13
15
Product Description
Features of the TITANUS
PRO·SENS
®
TITANUS
PRO·SENS
®
is the latest generation of WAGNER air sampling
smoke detection systems. Besides its use for room and equipment protec-
tion the variant can be used for monitoring climatic cabinets and climatic
ducts.
The device has a response sensitivity of up to 0.5 %/m, 0.1 %/m or 0.015
%/m light obscuration. According to the application further sensitivities can
be set. Thanks to the innovative High-Power-Light-Source technology a wide
detection range over all rated fire types is guaranteed.
If 2 detector modules are inserted in the TITANUS
PRO·SENS
®
, is the dou-
ble of the monitoring area reachable.
In order to prevent false alarms, the intelligent signal processing called
LOGIC
·SENS
distinguishes between interferences and the occurrence of
real fire.
Like spot-type detectors, which are electronically monitored in order to detect
line fractures and short circuits, air sampling systems require complex and
safe air flow monitoring. The unique air flow sensor technology used in all
WAGNER air sampling smoke detection systems guarantees the detection
of faults such as pipe fractures or blockages of air sampling points.
The low-level air flow is equipped with a dynamic air flow sensor in order to
detect small and quick changes.
Air flow monitoring is temperature compensated and can be adjusted de-
pending on the air pressure.
Depending on the required pipe design the air sampling points have defined
hole diameters. For these exact airs sampling points WAGNER has devel-
oped patented aspiration-reducing film sheets with marking tape and clips
that permit an easy mounting and avoid secondary noise. Another advan-
tage is the quick and easy retrieval and check of the air sampling point di-
ameters.
The system’s air sampling points can be compared to spot-type detectors.
The monitoring areas can therefore be designed according to the relevant
valid national regulations.
The diagnostic software permits quick and reliable fault finding for mainte-
nance and service. The current device condition and any saved data can be
downloaded to a PC via a special interface.
2
2.1
Sensitivit
LOGIC
·SEN
Safe airflow monitoring
Patented detection points
Spot detector spacing
Diagnostics
To Next Page
Loading...
