TITANUS
PRO·SENS
®
Maintenance
06/13
177
Changing special air filter SF-400/650
Figure 101: Exchange of filter element
To change the filter insert follow these steps:
1. Loosen the two PVC reducing couplings on the special filter 1a. Loosen
the two PVC reducing couplings on the special filter 1b.
2. Remove the two screw-in plugs on the filter housing.
3. Remove the filter insert from the housing and replace with a new one.
4. Replace the two screw-in plugs in the filter housing.
5. Re-insert the special filter into the pipe system and fix it firmly in place
with PVC reducing couplings.
NOTICE
When installing the special filter it is important to note the direction of air
flow!
NOTICE
Opening the housing lid of the special air filter causes an air flow fault in
TITANUS
®
.
9.7
To Next Page
Loading...
