TITANUS
PRO·SENS
®
Product Description
06/13
17
Areas of Application
The air sampling smoke detection system TITANUS
®
is a technology used
for early smoke detection and very early smoke detection for rooms and
equipment.
Air samples are drawn from the protected area via a pipe system with de-
fined air sampling points and passed to the detector module.
It is particularly suitable for areas in which spot-type detectors cannot be
used or only under certain conditions.
In particular these are areas:
▪ with high fire risk
▪ where a high detection sensibility is required
▪ with limited access and where spot-type detectors are difficult to install or
service
▪ which are air conditioned
▪ which have a greater height than admissible for spot-type detectors
▪ where spot-type detectors are undesirable for aesthetic reasons
▪ where electromagnetic fields have an impact
▪ which are exposed to high or low temperatures
▪ where filters are required due to impurities in the atmosphere
▪ which must be protected from vandalism
TITANUS
®
is suitable for:
Rooms such as:
▪ floor voids, ceiling voids
▪ tunnels, ducts, voids with difficult access
▪ storage areas, high-rack storage, elevator shafts
▪ museums, cultural centre
▪ deep-freeze storage
2.2
Principle
Room protection
To Next Page
Loading...
