TITANUS
PRO·SENS
®
Technical Description
06/13
37
Air filter for dusty areas
6
ir sampling pipe
LF-AD
Special filter
Figure 19: TITANUS PRO•SENS
®
with air filter
In highly dusty areas air filters must be used in order to protect the unit’s de-
tector. Impurities can occur in areas such as clean rooms with a fresh air
supply.
Is a rule the air filter type LF-AD is used, consisting of a plastic housing. The
multi-layer filter absorbs particles larger than about 15 μm.
The air filter is automatically monitored for dirt (blockages) via the TITANUS
®
air flow monitoring system. If the air filters are blocked, the filter elements
must be replaced after opening the filter housing.
In case of a high amount of dust a special filter type SF-650 or type SF-400
with a larger surface is available. The special filter guarantees a safe filtra-
tion of dust and dirt. The particles are separated and permanently kept back
from the filter medium. Even if the filter is due to be changed a constant air
quality is guaranteed.
3.3.4
Air filter, type LF-AD-
Special Filter Type SF-
To Next Page
Loading...
