WAGNER TITANUS PRO-SENS - Steam Trap Type

TITANUS PRO·SENS
®
Installation pipe system
06/13
153
Steam trap type KA-1
Figure 91: Mounting of the steam trap type KA-1 to the pipe system
Install the steam trap at the lowest port of the pipe system behind the air fil-
ter and TITANUS
®
– device. Glue the air-tight pipe system with steam trap.
1. Place the steam trap to the intended position and fasten the steam trap
with two 40 mm pipe clamps.
2. Glue the air-tight pipe system with steam trap.
7.10.2
Connection