WAGNER TITANUS PRO-SENS - Page 118

Installation
TITANUS PRO·SENS
®
118
06/13
TITANUS
®
cylinder of flat head screws
– thread diameter: max. 6 mm
head diameter: max. 10 mm
Support
(type MT-1)
cylinder or flat head screws
– thread diameter: 4 mm
washer
– diameter: 9 mm
– hole diameter: 4,3 mm
The spaces between boreholes are given below (all dimensions in mm).
Figure 67: Borehole spaces of TITANUS
®
without support
Installation Material
Spacing of boreholes