TITANUS
PRO·SENS
®
Maintenance
06/13
181
Check air flow monitoring
A pipe fracture or blockage is indicated for each sensor module on the elec-
trics board via a flash code LED.
Proceed according to chapter Commissioning “Air Flow Monitoring”.
Check fault signal transmission
A fault will be indicated on TITANUS
®
and the central control panel.
Proceed according to chapter Commissioning “Fault Signal Transmission“.
Maintenance intervals
The maintenance includes regular servicing. The air sampling smoke detec-
tion systems are checked during commissioning and annually thereafter.
For each service, the following checks must be carried out:
Type of Check Measure Other Information
in Chapter
Servicing Visual check
Detection unit and
alarm forwarding
Check pipe system
Air flow sensor adjustment
Air flow monitoring
Fault forwarding
Maintenance
Maintenance
Maintenance
Maintenance
Maintenance
Commissioning
In addition to the annual maintenance national regulations and standards re-
ferring to the intended use must be considered, as well as application-
specific requirements, if necessary.
9.9
9.10
9.11
To Next Page
Loading...
