WAGNER TITANUS PRO-SENS - Page 7

TITANUS PRO·SENS
®
06/13
7
5.3.2 Simplified pipe project design 81
5.3.2.1 I - Pipe system 81
5.3.2.2 U - Pipe system 82
5.3.2.3 M - Pipe system 83
5.3.2.4 Double - U - Pipe system 84
5.3.3 Project planning with branch pipes 86
5.3.4 Project planning with long intake lines > Ø 25 mm 88
5.3.5 Project planning with acceleration apertures 90
5.3.6 Project design for forced air flow 95
5.3.7 Project design with air sampling hose 99
5.3.8 Project planning with air return 100
5.4 Mains supply 102
6 Installation 105
6.1 General 105
6.2 Opening the TITANUS
PRO·SENS
®
106
6.3 Settings 107
6.3.1 Detector module 107
6.3.1.1 Setting of the response sensitivity 107
6.3.1.2 Delay period of the alarm activation 107
6.3.1.3 Activating threshold of the air flow monitoring 108
6.3.1.4 Delay period of the air flow fault 108
6.3.1.5 Fault display 109
6.3.1.6 LOGIC·
SENS 109
6.3.1.7 Function of the collective fault contact 109
6.3.1.8 Setting of the fan voltage TITANUS
PRO·SENS
®
110
6.3.1.9 Connect the fan at TITANUS
PRO·SENS
®
111
6.3.1.10 Setting of fan voltage at TITANUS
PRO·SENS
®
-SL 112
6.3.1.11 Connecting the fan at TITANUS
PRO·SENS
®
® -SL 113