WAGO Compact Controller 100 - Figure 22: WAGO Ethernet Settings - Communication Link

100 Commissioning WAGO I/O System Compact
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
Figure 22: “WAGO Ethernet Settings” – Communication Link
Once you have configured “WAGO Ethernet Settings” and have clicked [Apply],
connection to the controller is established automatically.
If “WAGO Ethernet Settings” has already been started with the correct
parameters, you can establish connection to the controller by clicking [Read].