WAGO Compact Controller 100 - Technical Data

WAGO I/O System Compact Properties 37
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
4.3 Technical Data
4.3.1 Mechanical Data
Table 18: Technical Data – Mechanical Data
Width
108 mm / 4.252 inch
Height
90 mm / 3.543 inch
Depth from upper edge of DIN-rail
55 mm / 2.165 inch
Weight
195 g
4.3.2 System Data
</dg_
Table 19: Technical Data – System Data
CPU
Cortex A7, 650 MHz
Operating System
Real-time Linux
®
with RT Preemption
Patch
Memory card slot
Push-push mechanism,
sealable cover lid
Type of memory card
MicroSD up to 32 Gbytes
(All guaranteed properties are valid only
in connection with the WAGO memory
cards 758-879/000-3102 and
758-879/000-3108.)
4.3.3 Power Supply
Table 20: Technical Data – Power Supply
Input Voltage System U
S
+
24 VDC (SELV, −15 … +20 %)
• Power supply via wiring interface
(picoMAX
®
connection)
Power consumption max. System U
S
+
500 mA
Input voltage field U
in
+
24 VDC (−15 … +20 %)
• Power supply via wiring interface
(picoMAX
®
connection)
Power consumption max. Field U
in
+
2 A
Output voltage System U
out
+
24 VDC (−15 … +20 %)
Current output max.System U
out
+
200 mA
Isolation
1250 V (DC 1 min.,
between system and field level)
Power failure time acc. IEC 61131-2
Depending on external buffering