WAGO Compact Controller 100 - Digital Outputs; Analog Inputs; Analog Outputs; Table 27: Technical Data - Digital Outputs

40 Properties WAGO I/O System Compact
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
4.3.10 Digital outputs
Table 27: Technical Data – Digital Outputs
Number of digital outputs
4
Output voltage
24 VDC
Load types
DC, general use (according to UL
61010-2-201, paragraph 4.4.2.101)
Reverse voltage protection
Yes
Switching frequency (max.)
1 kHz
Output current max., 1 output
0.5 A, short-circuit protected
4.3.11 Analog inputs
Table 28: Technical Data – Analog Inputs
Number of analog inputs
2
Connection types
Single-ended
Input voltage, measurement range
0 … 10 V
Input voltage (max.)
±30 V
Typ. input resistance
> 100 kΩ
Resolution
16 bits
Temperature coefficient
< ±0.01 % / K of full scale value
4.3.12 Analog outputs
Table 29: Technical Data – Analog Outputs
Number of analog outputs
2
Output voltage, measurement range
0 … 10 V
Load impedance
> 5 kΩ
Typ. settling time
100 ms
Resolution
12 bit
Measurement error at 25 °C
< ±0.2 % of full scale value
Temperature coefficient
< ±0.005 % / K of full scale value