WAGO Compact Controller 100 - SSH Server Settings Page; Table 97: WBM SSH Server Settings Page - SSH Server Group

WAGO I/O System Compact Appendix 163
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.2.16 “SSH Server Settings” Page
The settings for the SSH service are shown on the “SSH Server Settings” page.
“SSH Server” Group
Table 97: WBM “SSH Server Settings” Page – “SSH Server” Group
Parameters
Explanation
Service active
You can enable/disable the SSH server.
Port Number
Enter the port number.
Allow root login
You can enable or inhibit root access.
Allow password login
Enable or disable the password query function.
Click the [Submit] button to apply the changes. The changes take effect
immediately.