WAGO Compact Controller 100 - Clock Settings Page; Table 77: WBM Clock Settings Page - Timezone and Format Group; Table 78: WBM Clock Settings Page - UTC Time and Date Group

148 Appendix WAGO I/O System Compact
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.2.6 “Clock Settings” Page
The date and time settings are displayed on the “Clock Settings” page.
“Timezone and Format” Group
Table 77: WBM “Clock Settings” Page – “Timezone and Format” Group
Parameter
Explanation
Timezone
Select the appropriate time zone for your location.
Default setting:
AST/ADT
“Atlantic Standard Time,” Halifax
EST/EDT
“Eastern Standard Time,” New York,
Toronto
CST/CDT
“Central Standard Time,” Chicago,
Winnipeg
MST/MDT
“Mountain Standard Time,” Denver,
Edmonton
PST/PDT
“Pacific Standard Time”, Los Angeles,
Whitehouse
GMT/BST
“Greenwich Mean Time”, GB, P, IRL,
IS, …
CET/CEST
“Central European Time,” B, DK, D,
F, I, CRO, NL, …
EET/EEST
“Eastern European Time,” BUL, FI,
GR, TR, …
CST
“China Standard Time”
JST
“Japan/Korea Standard Time”
TZ string
For time zones that cannot be selected with the
“Time Zone” parameter, enter the name of the time
zone or the country or city applicable to you.
You can determine a valid name for the time zone
here:
http://www.timeanddate.com/time/map/
Time Format
For switching between 12-hour and 24-hour time
display
Click the [Submit] button to apply a change. The change takes effect
immediately.
“UTC Time and Date” Group
Table 78: WBM “Clock Settings” Page – “UTC Time and Date” Group
Parameter
Explanation
UTC Date
Set the date.
UTC Time
Set GMT time.
Click the [Submit] button to apply a change. The change takes effect
immediately.