WAGO Compact Controller 100 - Fieldbus Tab; MODBUS Services Configuration Page; Table 109: WBM Modbus Services Configuration Page - Modbus TCP Group; Table 110: WBM Modbus Services Configuration Page - Modbus UDP Group

WAGO I/O System Compact Appendix 177
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.3 “Fieldbus” Tab
15.1.1.3.1 “MODBUS Services Configuration” Page
The “Modbus Services Configuration” page displays the settings for various
Modbus® services. The groups only appear if the e!RUNTIME system is
enabled. Otherwise an information text is displayed.
“Modbus TCP Slave” Group
Table 109: WBM “Modbus Services Configuration” Page – “Modbus TCP” Group
Parameters
Explanation
Service active
Disable or enable the Modbus/TCP service.
Click the [Submit] button to apply the changes. The change takes effect
immediately.
“Modbus UDP Slave” Group
Table 110: WBM “Modbus Services Configuration” Page – “Modbus UDP” Group
Parameters
Explanation
Service active
Disable/enable the Modbus UDP service.
Click the [Submit] button to apply the changes. The change takes effect
immediately.