WAGO Compact Controller 100 - Security Tab; Openvpn; Ipsec Configuration Page; Table 111: WBM Openvpn; Ipsec Configuration Page - Openvpn Group

178 Appendix WAGO I/O System Compact
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.4 “Security” Tab
15.1.1.4.1 “OpenVPN / IPsec Configuration” Page
The “OpenVPN / IPsec Configuration” page displays the settings for OpenVPN
and IPsec.
“OpenVPN” Group
Table 111: WBM “OpenVPN / IPsec Configuration” Page – “OpenVPN” Group
Parameter
Explanation
Current State
The current status of the OpenVPN service is
displayed.
stopped
The service is disabled.
running
The service is enabled.
OpenVPN enabled
Enable or disable the OpenVPN service.
openvpn.config
Select an OpenVPN configuration file to be
transferred from PC to product or vice versa.
Click the [Submit] button to apply a change.
To select a file on the PC, click the Choose file … selection field.
To transfer the selected file from the PC to the product, click [Upload] button.
To transfer a file from product to PC, click the [Download] button.
The changes only take effect after the product restarts. For this purpose, use the
WBM reboot function. Do not switch off the product too early!