WAGO Compact Controller 100 User Manual

WAGO I/O System Compact Appendix 165
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
15.1.1.2.18 “Configuration of DNS Server” Page
The “Configuration of DNS Server” page displays the DNS service settings.
“DNS Server” Group
Table 99: WBM “Configuration of DNS Server” Page – “DNS Server” Group
Parameter
Explanation
Service active
You can enable/disable the DNS server service.
Mode
Select the operating mode of the DNS server.
Proxy
Requests are buffered to optimize
throughput.
Relay
All requests are routed directly.
Static Hosts
This displays the names for IP addresses. If no
assignment was defined, “No static hosts
configured” is displayed.
Add Static Host
You can add static IP addresses and host names
below.
IP Address
Enter a new static assignment,
e.g., “192.168.1.20:hostname”.
You can enter 10 assignments.
Hostname
Enter a host name.
Click the [Submit] button to apply the changes. The changes take effect
immediately.
To accept a new assignment click the [Add] button. The change takes effect
immediately.
Click [Delete] to delete an existing assignment. The change takes effect
immediately.

WAGO Compact Controller 100 Specifications

General

Brand	WAGO
Model	Compact Controller 100
Category	I/O Systems
Language	English