WAGO Compact Controller 100 - Table 70: WBM Ethernet Configuration Page - Ethernet Interface

140 Appendix WAGO I/O System Compact
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
“Ethernet Interface Configuration” Group
Table 70: WBM “Ethernet Configuration” Page – “Ethernet Interface Configuration” Group
Parameter
Meaning
Interface X<n>
A separate area is displayed for each interface in
the controller.
Enabled
You can enable or disable the interface.
Autonegotiation on
When Autonegotiation is enabled, the connection
modalities are negotiated automatically with the peer
devices.
Speed/Duplex
Select the transmission speed and the duplex
method:
10 Mbit half-duplex
Information can only be
sent or received.
100 Mbit half-duplex
10 Mbit full-duplex
Information can be sent
and received
simultaneously.
100 Mbit full-duplex
Click [Submit] to apply changes. The changes take effect immediately.