WAGO Compact Controller 100 - Table 33: Technical Data - Other; Table 32: Technical Data - Fieldbus; Table 31: Technical Data - Analog Temperature Sensors; Other

42 Properties WAGO I/O System Compact
751-9301 Compact Controller 100
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
4.3.14 Analog Temperature Sensors
Table 31: Technical Data – Analog Temperature Sensors
Number of inputs
2
Sensor types
Switchable: Pt1000, Ni1000 or raw value
Temperature range
Pt
–60 … +350 °C
Ni
–60 … +350 °C
Measuring current (typ.)
0.5 mA
Connection types
2-wire connection
Resolution (over entire range)
16 bits
Measuring accuracy Pt1000 at 25 °C
< ±0.5 % hardware-related
Measuring accuracy Ni1000 at 25 °C
< ±0.5 % hardware-related
Temperature coefficient
< ±0.02 % / K of full scale value
4.3.15 Fieldbus
</dg_
Table 32: Technical Data – Fieldbus
Supported protocols (license-free)
CODESYS Modbus TCP, CODESYS
Modbus RTU, Cloud Connectivity
(Standard)
Supported protocols (license required)
Cloud Connectivity (2nd connection per
DRM), MQTT Sparkplug (per DRM)
4.3.16 Other
</dg_
Table 33: Technical Data – Other
Fire load
6,045 MJ