OTHER MODES OF OPERATION EVALUATION MODE
133
The EVALUATION UNIT EXTEND CODE screen is displayed.
Note the Extend Code, then call WatchGuard Video Customer
Service to request that the unit’s evaluation time period be extended.
Give the Extend Code to the customer service representative. The
representative will give you a four- or five-digit Extend Time PIN.
Press the OK key.
The EXTEND TIME screen is displayed.
Use the arrow keys to move to a digit in the PIN, then press the
Enter key. Repeat as necessary to enter the entire PIN.
If the PIN has five digits, the Login key is pressed automatically
after you enter the last digit.
If the PIN has four digits, press the Login key after you enter the
fourth digit.
A brief message is displayed stating that the evaluation time period
has been extended.
The Extend feature adds days relative to the Evaluation expiration
date.
For example, if 3 days remain in the evaluation time period, and 10
days are added with the Extend feature, the DV-1 unit will have 13
days remaining in the evaluation time period (3 + 10 = 13).
If the evaluation time period has been expired for 3 days, and 10
days are added, the DV-1 unit will have 7 days remaining in the
evaluation time period (-3 + 10 = 7).
To Next Page
