Chapter 1
1-2 Printer-Applicator User’s Manual
Procedures that should be followed in a specific order are listed in numbered paragraphs:
Disconnect the applicator from the AC power source.
References to other section names appear in bold text:
For more information, see Chapter 5, Product Detector Setup.
Messages that appear on a machine screen are shown in a box using bold Univers typeface:
WEBER MODEL 4300
(c)2012
Pay special attention to any procedure that may have one of the following symbols. Read all of the
Caution and Warning instructions and follow them when performing the corresponding procedures.
CAUTION
THIS SYMBOL IS USED TO WARN USERS OF DANGER FROM (POSSIBLE)
ELECTRICAL SHOCK! READ ALL CAUTION STATEMENTS AND FOLLOW
ALL THE INSTRUCTIONS TO AVOID A PERSONAL INJURY AND/OR
EQUIPMENT DAMAGE.
CAUTION
THIS SYMBOL IS USED TO WARN USERS THAT THERE IS A DANGER OF
BEING INJURED BY WORKING PARTS OF THE APPLICATOR! READ ALL
CAUTION STATEMENTS AND FOLLOW ALL THE INSTRUCTIONS TO AVOID
A PERSONAL INJURY AND/OR EQUIPMENT DAMAGE.
NOTICE
THIS SYMBOL IS USED TO WARN USERS THAT MACHINE DAMAGE IS
POSSIBLE IF ALL PROCEDURES ARE NOT FOLLOWED CAREFULLY. READ
ALL NOTICE STATEMENTS AND FOLLOW ALL THE PROCEDURES
CAREFULLY IN ORDER TO AVOID EQUIPMENT DAMAGE.