Weber 4300 - Set Run Mode

Controller Operation
Weber Packaging Solutions, Inc. 6-7
Set Run Mode
The following table summarizes the trigger options available with each application mode.
Mode
Product
Detector
IN01
Trigger
Apply
IN01
Trigger
Print
IN12
Notes
Tamp Blow
Apply Label
Apply Label
Tamp Blow PA
Print and Apply
Label
Print and
Apply Label
One sensor or signal prints and
applies a label.
Tamp Blow PA
Apply Label
Apply Label
Print Label
Separate signals to print and apply a
label.
Air Blow
Apply Label
Apply Label
Air Blow PA
Print and Apply
Label
Print and
Apply Label
One sensor or signal prints and
applies a label.
Air Blow PA
Apply Label
Apply Label
Print Label
Separate signals to print and apply a
label.
Inverted Tamp
Blow
Apply Label
Apply Label