Chapter 9
9-10 Printer-Applicator User’s Manual
Outputs Specifications
Optically isolated MOS relay
Maximum switching voltage: 40 VDC
Maximum current: 400mA continuous
Ready
The Model 4300 is in Run mode and ready to print and apply labels.
Tamp Home
The Model 4300’s tamp pad is in the Home position and ready to accept a printed label.
Label-On-Pad
A printed label is present on the tamp pad.
Warning
Label or ribbon supply is low.
Tamp Error
The tamp pad was physically moved off the home position by some means other than the Model
4300 control system.
Data Ready
The printer contains an active print job.
To Next Page
Loading...
