Chapter 7
7-2 Printer-Applicator User’s Manual
Weekly Maintenance
1. Clean the peeler bar and tamp pad using alcohol or some other similar, compatible
solvent.
2. Clean dust from the product detector and low label detector lenses.
NOTE: Do not use air pressure from the shop air supply to blow dust from the
machine. There is a possibility that this air can contain water and emulsified oil,
which can damage the electrical components in the machine.
3. Examine air supply connections for leakage, correct if necessary.
4. Wipe down the exterior surfaces of the machine.
5. Examine all roller assemblies for free rotation, excessive play, etc., and correct as
necessary.
To Next Page
Loading...
Need help?
General
