The PROFI-Display
104 Operating Manual
8.3 Up to 16 sounds in PROFI mode
The starting point for playing in PROFI mode is the sound selector mapping. If each manual is covered with
one sound. 12 more sounds are to be mapped on the manuals. The upper or lower manual can be assigned a
maximum of 12 selectors. The pedal with max. 4 selectors.
IMPORTANT: In total, the amount of 16 sound selectors cannot be
exceeded.
You can always see how many selectors you can distribute in the "SOUND POOL REST: 12" section.
ATTENTION: If the EASY MODE is switched back, the selectors are reset to the number of 3 x upper manual, 3
x lower manual and 1 x pedal allowed in the EASY MODE.
Add a new selector to an area
To apply another selector to a manual, hold down the SOUND POOL button with one finger. Pull with your
finger to the desired place and simply let the selector" fall" there.
In our example, an empty selector was placed between upper manual 1 and 2. This new selector can now be
filled with a new sound as normal.
The number of sounds still to be distributed in the SOUND POOL has decreased by 1. Here in the example
from 9 to 8.
To Next Page
Loading...
Need help?
General
