Live organ – Live Accordion – Church Organ
58 Operating Manual
VB3 Rotor-Settings
By sliding to the left (arrow to the right) you can reach further settings for the VB3.
Here you can adjust the rotor cabinet according to your wishes. The following settings are available:
Treble Horn
Slow: Here you set the speed of the high-pitched horn for the position Slow.
Fast: Here you set the speed of the high-pitched horn for the position Fast.
Belt: Here, the braking and draining speed can be set. The higher the value, the slower the high-frequency
horn is slowed down or accelerated when switching between Slow and Fast.
Bass Rotor
Slow: Here you set the speed of the bass drum for the Position Slow.
Fast: Here you set the speed of the bass drum for the position Fast.
Belt: Here, the braking and draining speed can be set. The higher the value, the slower the bass drum is
slowed down or accelerated when switching between Slow and Fast.
To Next Page
Loading...
Need help?
General
