OAX-System 133
8.8 WERSIChord
The WERSIChord button is identical to the WERSIChord panel button. See the chapter 4.6.3.1 WERSIChord.
8.9 Sound list
Use the display button Sounds to access the list of OAX sounds. This gives you an
overview of all the sounds that are in your instrument.
Note: A selector is always selected on the upper or lower manual or pedal in the main
display. If a sound is selected in this list, the sound is placed on this selector via LOAD.
See chapter 8.9.2 Load sound onto a selector.
This list also appears if, for example, you want to change a sound in a style or MIDI-
Sequence.
General notes on the sound list
The list is divided into 13 main groups and several child instrument groups. The main groups correspond to
the headings of the sound buttons on the control panel, and the instrument groups correspond exactly to the
buttons on the control panel. So from drawbars to drums. So you can select the desired area once via the
display and on the other hand via one of the control panel buttons.
To sort the list alphabetically, press Sound Name in the list heading. For a numerical display, press PRG.
A small arrow next to the range name shows you the current sort. Arrow up -> from A to Z, Down arrow ->
from Z to A. The direction can be reversed by repeatedly pressing Sound Name or PRG.
To Next Page
Loading...
Need help?
General
