The PROFI-Display
134 Operating Manual
Extended sound list for the live organ models
As soon as you press the Live Organ main group, the display jumps to the special sound list for the Live Organ
models.
Select the desired organ model on the left-hand side.
You can return to the normal list of sounds with the display button Sound List.
Load sound onto a selector
1. In PROFI mode, select the selector with which you want to occupy the desired sound.
2. Press the display area sound and the sound list shown above opens.
3. In the list, select the sound you want. You can play these on the corresponding manual before the
actual loading.
4. Press Load to load the sound onto the selector. If you do not want to apply the sound to the selector,
you can leave the list with Back.
Note: Most of the sounds in the list are associated with the sound buttons. However, there are also sounds
that are only used for styles or MIDI-Sequences. These are then not assigned to the sound buttons, as these
are usually not playable on a keyboard.
To Next Page
Loading...
Need help?
General
