OAX-System 61
At the top left there are the effects Vibrato and Hall (Reverb)
The vibrato can be turned on or off. Furthermore, the vibrato speed can be adjusted between fast (FAST) and
slow (SLOW), as well as the intensity between little (LIGHT) and strong (HEAVY).
The Reverb can be switched on or off and adjusted in intensity between medium (MED) and long (LONG).
Furthermore, the five effects Chorus, Delay, Scanner vibrato, Rotor and an Amplifier (Amp) can be switched
on and off on the front. You can see how you can set these effects under the advanced settings.
Advanced settings for the FARFISA Compact
By sliding to the left (arrow to the right) you can access further settings for the FARFISA Compact.
The built-in effects give the sound the finishing touch. The Effects Chorus, Delay, Scanner vibrato, Rotor and
an Amplifier are available.
Volume
If you save your own FARFISA sound, you can set the volume here. If you e.g. B. used the AMP, the sound
must be safely stored at a lower volume.
Key Click volume
As with many analog instruments, playing the keyboard produces a clicking sound. You can set this noise to
quiet or loud or switch it off completely.
Attack and Release
Attack delay the onset of the sound. The sound fades in softly. With Release, the sound gets a longer decay.
To Next Page
Loading...
Need help?
General
