Overview of the control panels
36 Operating Manual
4.6.3.5 Fast operation Delay
As soon as you have briefly tapped the Delay button, the display will appear to set the Echo effect.
For thee MANUALS, ACCOMPANIMENT and DRUMS
areas, you will find a controller with which you can
adjust the output of the Echo effect device, also called
RETURNS.
Small tip: As long as no sound is selected, the echo is
used, no change may be heard. To set the echo effect
per sound, see the chapter for EASY mode 7.2 „The
EASY Manual Controller“ or PROFI mode in chapter
8.4.1 „The Standard Control“.
If you do not make any settings, the display will
disappear after a few seconds. When the HOLD display
button is pressed, the display remains permanently
displayed.
You can use the appropriate slider to vary the volume
of the echo effect.
With RESET, you reset the volume to the value stored
in the Effects program.
To change the DELAY program, briefly tap the
appropriate name field. Here in the example on "Delay
Tempo" in the manuals area.
The selection box of possible Echo programs opens.
Once you have programmed your own effect settings
and given a name, these effect presets will also appear
in this list.
Note: You can find out how to program your own
effects in the chapter 8.11 Effects.
To Next Page
Loading...
Need help?
General
