OAX-System 43
4.10 User panel Accompaniment Controls
On the left side next to the upper manual you will find the
"Accompaniment Controls" panel.
Here you can operate your styles, start MIDI-Sequences and
Multimedia-Files and switch the rotor function for the pull bars
from slow to fast .
Here are the explanations in detail:
Start/Stop
The accompaniment starts immediately with playback when the Start/Stop button is pressed. Pressing
start/stop again while accompanying the company stops playback.
Selected MIDI-Sequence and Multimedia-Files are also operated via Start/Stop.
Synchron-Start
After the Sync.Start button has been pressed (LED in the button lights up), the playback of the
accompaniment automatically starts when the first note is pressed on the lower manual or on the pedal,
the LED goes off.
By pressing the Sync.Start button again, the running accompaniment can also be stopped; however, the
function "Sync.Start" for the start of the next accompaniment is now activated again.
Variations
Each style has 4 variations. These are musically and/or differently designed in their instrumentation.
The selected variation is indicated by the LED that is illuminated in the button.
When switching between Variation A, B, C or D, a different fill-in plays in each case. The
corresponding variation button flashes.
Depending on when you press the new Variation button Var A - D, the fill in can have a length of a
whole measure, or just 3, or 2 or just a quarter.
To Next Page
Loading...
Need help?
General
