OAX-System 59
Microphone
The sound of a rotor cabinet is essentially determined by the acceptance by microphones. The following
settings are available:
Distance: The Distance setting determines the distance at which the microphones are positioned. The
higher the value, the closer the microphones are to the rotor cabinet.
Balance: This setting adjusts the balance between the microphones for the high horn and the
microphones for the bass drum. At values above 63, the microphones for the high-pitched horn
become louder and at values below 63, the microphones for the bass drum become louder.
Ambience: The Ambience setting determines how many reflections are returned from the surrounding
walls.
Spread: With the spread, you get a larger stereo sound image.
Note: While you adjust the rotor according to your wishes, you can test your results directly with Rotor
On/Off and Slow/Fast.
Setting FREE
Free On
If you save your own drawbar sound, you can activate the FREE function before saving. Free means that
when registering this drawbar tone, the current panel button and footage values will be used.
Free Off
If you save the sound with FREE not activated, the sound will be saved completely. So with the settings of the
9 footages and the settings on the control panel.
To Next Page
Loading...
Need help?
General
